All lines must be 8cm wide.
For non-international matches, the dimensions are as follows:
Length (touch line): minimum 25m
Width (goal line): minimum 16m
For international matches,the dimensions are as follows:
Length (touch line): minimum 38m
Width (goal line): minimum 20m
The two longer boundary lines are called touch lines. The two shorter lines are called goal lines.
The pitch is divided into two halves by a halfway line, which joins the midpoints of the two touch lines.
The centre mark is indicated at the midpoint of the halfway line. A circle with a radius of 3m is marked around it.
A mark must be drawn outside the pitch, 5m from the corner arc and at right angles to the goal line, to ensure that defending players retreat this distance when a corner kick is being taken. The width of this mark is 8cm.
Two additional mark, must be made on the pitch to indicate the minimum distance to be retreated when a kick is being taken from the second penalty mark. The width of this mark is 8cm.
Within each penalty area, a penalty mark is made 6m from the midpoint between the goalposts and equidistant to them.
A goal consists of two upright posts equidistant from the corners and joined at the top by a horizontal crossbar. The goalposts and crossbar must be made of wood, metal or other approved material. They must be square, rectangular, round or elliptical in shape and must not be dangerous to players.
The distance(inside measurement)between the posts is 3m and the distance from the lower edge of the crossbar to ground is 2m.
Both goalposts and the crossbar have the same width and depth, 8cm. The nets must be made of hemp, jute or nylon or other approved material and attached to the back of the goalposts and the crossbar with a suitable means of support. They must be properly supported and must not interfere with the goalkeepeer.
The goalposts and crossbars must be of a different colour from the pitch.
The goal must have adtabilising system that prevents them from overturning. Portable goals may only be used if they satisfy this requirement.
• They are situated in front of the technical area and are 5m in length. They are marked at each end with a line 80cm in length, 40cm of which is drawn on the pitch and 40cm off the pitch, and 8cm wide
• The area in front of the timekeeper's table 5m to either side of the halfway line is kept clear
• A team's substitution zone is situated in the half of the pitch defended by said team and changes in the second half of the match and periods of extra time, if any